LumberJocks

Reply by ajosephg

  • Advertise with us

Posted on Problems Notching a 1x2

View ajosephg's profile

ajosephg

1882 posts in 4192 days


#1 posted 08-07-2012 08:51 AM

In short:

Raise the blade 3/8 of an inch

Draw a line 2 inches from end of each board.

Using the miter gauge and make a cut so the edge of the blade is just inside the line.

Make multiple passes between the first cut and the end of the board until all the wood in the notch is removed.

Flip the board and do the other end.

BTW – welcome to Lumberjocks

-- Joe


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com