Reply by Redoak49

  • Advertise with us

Posted on Baileigh 3HP CYCLONE DUST COLLECTOR DC-2100C

View Redoak49's profile


4913 posts in 2866 days

#1 posted 06-19-2018 11:20 AM

You would be lucky to get 600 cfm with your current setup and probably in the 400-500 cfm range given that you have a dust deputy and fairly long runs.

Given that you are doing resawing and drum sanding, I would look at a longer cone on a dust collector. You will generate lots of fine dust and some have reported issues with the shorter cone DC.

Just a caution, carefully read the data on performance and how it was obtained and test conditions. I find the reported cfm of 2817 a bit strange for this class dust collector. I can not get that on my 5 hp DC.

Look at what your piping configuration that you will use and the performance curves and determine what cfm each collector will provide.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics