LumberJocks

Reply by hairy

  • Advertise with us

Posted on Old Unisaw + new Ark Shark = different way to make ZCI

View hairy's profile

hairy

2887 posts in 3983 days


#1 posted 05-15-2018 01:51 AM

I got the Ark to go down all the way like it should. It was hitting the washer on the bottom mounting bolt. I tried a smaller washer and it still hung up, so I took it off. I might take it all off and grind the Ark a little where it hits.

Maybe it’s not plumb, I’ll play with it some more. When I installed it I placed a framing square up against the saw blade and the Ark, clamped the square to the table, clamped the Ark to the square and tightened the bolts. I brought another square up to the other side to check. It looked good to me.

-- My reality check bounced...


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com