Reply by knotscott

  • Advertise with us

Posted on Newbie looking at Delta 36-725 vs Ridgid R4512

View knotscott's profile


8329 posts in 3859 days

#1 posted 05-15-2018 01:42 AM

Something like this one would be a good starting point

Cast iron top and decent fence for not a lot of outlay.

There are several other Craftsman 113 saws shown, but the others have the factory fence. It can be made to work fine, but the Align-a-rip on the saw above is much better. If the motor works fine, you should just need to put a good blade on it, align it and start cutting. It is missing the splitter and guard. If you want those safety pieces, they are easy to find on ebay for relatively cheap. A lot of people take them off (I did when I had my 113)

- JayT

That’s a great deal. An upgraded fence, belt drive induction motor, and two solid cast iron wings for $130.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics