LumberJocks

Reply by msinc

  • Advertise with us

Posted on Circle Jig help

View msinc's profile

msinc

567 posts in 1043 days


#1 posted 05-07-2018 05:49 AM


I have thought of a moving pin but can t find the track nor do i have the tools to make one. How is a larger peg going to work if the center is the same. I was going to plug hole but how do i measure so i don t do it wrong again. Can t do sander because this jig is for cutting bowl blanks

- Karda

Use a french cleat slide something like this.

attach a recessed ruler and you are in business. Even if it is off you can adjust after a test cut.

I built this from nothing but scrap I had on hand. Used a 1/4 drill bit end for my center dowel.

- woodbutcherbynight

That’s it!!!!! Not the only way to fly…...but definitely a way to fly!!!!! You might think you only have to cut one size circle and you can get it right the way you are doing it, but you will have to cut other sizes eventually. Might as well get it set up so you can perfectly adjust to whatever size you need when you need to do so.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com