Reply by woodbutcherbynight

I have thought of a moving pin but can t find the track nor do i have the tools to make one. How is a larger peg going to work if the center is the same. I was going to plug hole but how do i measure so i don t do it wrong again. Can t do sander because this jig is for cutting bowl blanks

- Karda

Use a french cleat slide something like this.

attach a recessed ruler and you are in business. Even if it is off you can adjust after a test cut.

I built this from nothing but scrap I had on hand. Used a 1/4 drill bit end for my center dowel.

-- Live to tell the stories, they sound better that way.