Reply by Ron Aylor

Posted on Help with joint choice and layout

2649 posts in 1129 days

#1 posted 04-26-2018 03:01 PM

I agree with Rich. You don’t really need the drawbore pins. Drawboring was typically used in place of glue. I use both glue and pins, but approach the joint a bit differently … I mark the pin locations during a dry fit … offset the holes in the tenons … and use clamps to align the holes during glue-up. See my blog Hepplewhite Stand #8: Completed Legs and Drawbore Pins for photos.

Go to Pulse page »

LumberJocks Pulse

	Author	Latest activity	New comments or replies since you last checked
jerodcox's Profile	jerodcox	09-21-2019 02:37 AM	sign in to get readership tracking
Mallet Swap 2019	Keebler1	09-21-2019 02:33 AM	sign in to get readership tracking
Carved Wood Bowl	Dark_Lightning	09-21-2019 02:28 AM	sign in to get readership tracking
1audreye1491wh3's Profile	1audreye1491wh3	09-21-2019 02:25 AM	sign in to get readership tracking
wieszak418272's Profile	wieszak418272	09-21-2019 02:23 AM	sign in to get readership tracking
Small Shop layout suggestions	Clobby	09-21-2019 02:22 AM	sign in to get readership tracking
8gabriellac3491rM3's Profile	8gabriellac3491rM3	09-21-2019 02:01 AM	sign in to get readership tracking
Kassermanse7's Profile	Kassermanse7	09-21-2019 01:59 AM	sign in to get readership tracking
Larry55's Profile	Larry55	09-21-2019 01:58 AM	sign in to get readership tracking
Lonely Walnut Bowl	Jim Jakosh	09-21-2019 01:52 AM	sign in to get readership tracking

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics