LumberJocks

Reply by NY_Rocking_Chairs

  • Advertise with us

Posted on Moving table saw down stairs

View NY_Rocking_Chairs's profile

NY_Rocking_Chairs

528 posts in 4165 days


#1 posted 08-31-2008 10:49 PM

Another thought, when we moved into this house the movers had to get all the heavy stuff into the basement, the biggest piece that would not disassemble was 500 lbs.

We have a bilco door and stairs, just to be safe I bought some 2×4s and ran them as vertical supports under each step. So each step then had its own vertical support going to the floor. I centered the support width wise and as close to the front edge of the step as possible, there are no risers, just steps.

That will give you piece of mind, but the 2×8s ramps should be enough.

-- Rich, anybody want a peanut?


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com