Reply by Stowerscw

  • Advertise with us

Posted on Oscillating Flutter?? Grizzly G0513ANV 17" Bandsaw

View Stowerscw's profile


25 posts in 983 days

#1 posted 04-18-2018 12:58 AM

I think you may have hit the nail on the head sir. THanks for you comment!

My thoughts is that it would be pretty bad to see a bent wheel get out of the factory, since they have to balance them before shipment.
I d really be focusing on the tires. A bit of debris under a tire, or a tire that is mounted just a hair off, climbing an edge, or a tire that is a bit thicker in one spot would all cause this condition.

This is exactly the condition I get on my big Grizz when my tires are about worn out. Slippage of the tire is next, and then you better be replacing it.

I d take the blade off, and hand spin the wheel with my finger just touching on the tire while holding your hand onto something solid so my finger didn t move. Any deviation in the tire will show up, and if it does, you need new tires, or to reseat the tires.

- Tennessee

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics