LumberJocks

Reply by TungOil

  • Advertise with us

Posted on 60HH 8''Jointer Powermatic Dust Collection ?????

View TungOil's profile

TungOil

1371 posts in 1095 days


#1 posted 03-29-2018 03:10 PM



Do you both have this same Jointer 60HH Helical head ?

Keep in mind that i have only made about 20 passes and there is nothing clogging the dust collection side it is empty of any shavings! There is just a small flow of dust coming out of the area I mentioned.

https://www.flickr.com/photos/[email protected]/shares/ux0f

Also I just thought of this is there any chance my infeed and out feed were installed incorrectly by the factory as in reversed—so that my infeed is actually the out feed—-I need to look at the configuration closly to see if this is possible.

I just can t believe the machine was designed this way there has to be a glitch

Are other woodworkers just allowing this and moving on !!

- Sleepinginatree


Yes same jointer, 60HH. Don’t expect that you will get 100% dust collection from any machine, but it does appear you have more escaping than I do.

It is highly unlikely that your tables were installed backwards. But it you want to verify, the front edge of the outfeed table has a rabbetting groove in it. Look at the picture on the PM website.

Oh, and PLEASE use push blocks and read up on safe jointer use before you run another piece of wood across that machine. Your short video scared the bejeezus out of me. You will be happier if you keep all your fingers.

-- The optimist says "the glass is half full". The pessimist says "the glass is half empty". The engineer says "the glass is twice as big as it needs to be"


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com