LumberJocks

Reply by Loren

  • Advertise with us

Posted on Please Help, Over sanded this plywood veneer

View Loren's profile

Loren

10477 posts in 4211 days


#1 posted 03-23-2018 09:08 PM

Andy’s idea is a new one on me. It might work.
PVA glue will mess with your finish though so
test first. Super-glue is transparent enough
to be used for spot filling lacquer finishes so it
might work if your finishing with something of
similar clarity, water-based poly for example.

Another idea is to either cut off or leave the edging
in place and make some strips out of walnut
rounded on top to fit in a routed groove around
the plywood. It would protrude, but not by much
and if you didn’t use too much glue squeeze out
won’t be a cleanup problem. For that matter you
could lay down a coat or two of finish before
cutting the groove.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com