LumberJocks

Reply by Andybb

  • Advertise with us

Posted on Please Help, Over sanded this plywood veneer

View Andybb's profile

Andybb

1938 posts in 1051 days


#1 posted 03-23-2018 09:03 PM

You could even try a light layer of glue then sprinkling dust from the plywood on top and GENTLY (400-600 grit) sanding it smooth, especially if you’re going to put a sealing finish on top of the whole thing. Use something long and flat to attach the sand paper to so that it is built up no higher than the original. Let it dry completely, mask it off and sprinkle some walnut dust on the walnut edge so they are flush and co-planer. Sand like it’s tissue paper. The area is small so I wouldn’t worry too much about the grain, just matching the color. Even Maple colored wood filler might work just as well.

I think the original problem is that the walnut was just slightly below the level of the ply.

-- Andy - Seattle USA


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com