LumberJocks

Reply by Sark

  • Advertise with us

Posted on New Guy/New Shop/Saw Size

View Sark's profile

Sark

337 posts in 1241 days


#1 posted 03-19-2018 06:22 PM

I had a 52” delta Unifence which I cut to approximately 36” and never regretted it. Unless you have large outfeed table and infeed and side support, its really tough to slide a 4×8 sheet of plywood over that table and tougher to get a straight cut without binding or wandering. Which is why sliders were invented, which is why track saws are so useful as well as vertical saws. I’ve seen a lot of commercial cabinet shops where the principal panel saw is a 10 or 12” saw with really big permanently fixed out feed and side tables. That works really well but takes a lot of floor space.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com