LumberJocks

Reply by John Smith

  • Advertise with us

Posted on Using a router as a planer

View John Smith's profile

John Smith

2014 posts in 672 days


#1 posted 03-13-2018 02:27 PM

and ~ take small bites at a time.
several passes will give you less tearout other issues than one or two full passes.
the last couple of passes should be 1/8” or less.
you will be telegraphing the profile of the router sled to the stock you are working on.
so – your sled and router base must be as straight and accurate as possible
a hefty router (2-3hp) with 1/2” shank and very sharp 1” to 1-1/4” bottom bit will be fine.

.

-- I am a painter. That's what I do. I paint things --


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com