LumberJocks

Reply by LittleShaver

  • Advertise with us

Posted on Burl table top

View LittleShaver's profile

LittleShaver

689 posts in 1470 days


#1 posted 03-12-2018 09:45 PM

I’ve done a couple of slab projects, only for use in my home, so take my advice lightly.
Looks like you’d be best off using both bow ties and epoxy. Those look to be some major voids.
While some folks dye the epoxy black, I did not. Instead, I added semi-precious stones as a kind of aggregate in the voids. Cheaper stuff deeper, better stuff near the surface. I also did not try to sand the voids. Made no sense to me to try to sand something I was going to drown in epoxy.
I would also at least skim coat the entire surface of the slab to fill in the termite tunnels.
I didn’t try to keep the bark on the ones I did, so I have no suggestions for that. The wife was concerned that the bark would just be a dust catcher, so off it came.

-- Sawdust Maker


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com