LumberJocks

Reply by optimusprimer92

  • Advertise with us

Posted on Square cut on one side of table saw only

View optimusprimer92's profile

optimusprimer92

43 posts in 1419 days


#1 posted 03-05-2018 03:31 AM



Troubleshooting is a step by step process, you don t start at a conclusion and work backwards. It sounds like you ve never set up the saw properly so you need to do that before troubleshooting a sled. Jump on youtube and watch some videos on setting up a table saw.

Ya, I guess man. I thought I had it set up before I ever turned it on. I originally had the miter slots squared to the blade perfectly. Took me about a week to get the fence set up because the rails are so finicky. I don’t know anymore. Now if I measure from the miter slot, the teeth are inconsistent from front to back. They literally change distance front to back when I rotate the same tooth. Then when I pick another tooth, it will be opposite from the original tooth. Everytime I ever raised the blade or lowered it, I had to resquare it for some reason. This is another reason I was lead to believe the arbor was the culprit.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com