LumberJocks

Reply by optimusprimer92

  • Advertise with us

Posted on Square cut on one side of table saw only

View optimusprimer92's profile

optimusprimer92

43 posts in 1409 days


#1 posted 03-05-2018 03:01 AM

I really think that I have runout. I have a large amount of blade wobble that is easily visible upon start up and shutoff. The kerf is also larger on both sides than the blade itself. Lastly, if I mark a tooth on the blade and set it firmly against a keft in a cut piece, as I rotate the blade from front to back, it will shift away from the cut. If I keep rotating the blade by hand, the teeth move closer and farther from the kerf whether it is measured from the back or the front. If that is not runnout, I have no idea what it is. Oh, and the blade is a brand new Diablo that is dead flat.

Now as for fixing it, how do you align the miter slots to a blade that is attached to an arbor with runout (if that is the case)? The miter slots are parallel and the sled slides easily.

One last thing. I believe my last thread was because of my old crosscut sled. I don’t know what happened, but when I made it, the cuts were square but at some point something happened and it wouldn’t cut square anymore. That is why I made the new one.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com