LumberJocks

Reply by Woodknack

  • Advertise with us

Posted on Square cut on one side of table saw only

View Woodknack's profile

Woodknack

13474 posts in 3232 days


#1 posted 03-05-2018 02:48 AM

What you describe isn’t runout. If the arbor were deformed you would be getting crazy vibration but it wouldn’t cause the problem you describe. Have you checked that the miter slots are parallel? The sled would be hard to move if not. Have you aligned the blade to the miter slot. Does the cut piece contact the back of the blade on the right side but not the left? Is the sled fence straight?

BTW, you posted this before and we tried to explain then that it wasn’t runout causing the problem.
http://lumberjocks.com/topics/254577

-- Rick M, http://thewoodknack.blogspot.com/


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com