LumberJocks

Reply by Mike_D_S

  • Advertise with us

Posted on Routing Plywood vs Solid Wood

View Mike_D_S's profile

Mike_D_S

598 posts in 2778 days


#1 posted 02-15-2018 09:06 PM

A couple of comments as I’ve done some testing of different bit styles doing pocket routing in a few different plywood and MDF types with different bits.

The compression spiral is a good bit if you are cutting completely through the plywood as the compression spiral acts as an upcut on the end and a down cut on the top, basically shearing towards the material in both cases.

For relatively shallow inlay, I recommend a downcut spiral to give the cleanest top surface and fairly minimal fuzz along the cut wall.

Mike

-- No honey, that's not new, I've had that forever......


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com