LumberJocks

Reply by ClaudeF

  • Advertise with us

Posted on Anyone use a carver’s vice

View ClaudeF's profile

ClaudeF

880 posts in 2040 days


#1 posted 02-15-2018 07:26 PM

John is correct – One size does not fit all… And, a vise/tilt table for relief carving is not good for carving in the round.

I do carving in the round, mostly from 4 inch tall to 10 inch tall. When I have occasion to carve a larger one, I use my ELI vise. https://www.facebook.com/eliwoodcarvingvises

I have mine mounted on a piece of 2×6. When I want to use it, I clamp the 2×6 to my workbench with a couple of F clamps. The Eli vise holds the carving secure even at full extension. If I need it portable, I take the vise and a spare piece of 2×6 (to put under a table) and my F clamps. I use drywall screws to secure the carving to the baseplate.

-- https://www.etsy.com/shop/ClaudesWoodcarving


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com