LumberJocks

Reply by DIYWaterDog

  • Advertise with us

Posted on Routing Plywood vs Solid Wood

View DIYWaterDog's profile

DIYWaterDog

59 posts in 984 days


#1 posted 02-15-2018 04:21 PM

Thank you! Excellent advice on the adhesives. Something I did not think about.

What I have is a 4×4 remnant of furniture grade plywood with finish sanded sides. Was going to use it to make a rather large sign. After thinking about the risk of adhesive dust, think it might be best to use it in another way.

Thanks!

TRU


be aware that the cheaper plywoods have voids in the inner plies.
so you have to have a purpose to engrave plywood. just for fun, practice, etc.
for more serious work – you have to use the more expensive brands with no voids.
on a HEALTH SAFETY note: you have no idea what the manufacturer used to
glue the plies together with…..... if it comes from outside the United States,
it could have some significant harmful chemicals in it that are not good for your innards.
I would suggest a full face respirator – not a paper mask – but a charcoal filtered respirator.
you don t want that nasty stuff in your lungs that may cause you a lifetime of problems.

if you need bigger stock for your projects, I would suggest gluing up panels the size you need.
just for fun panels do not have to have dowels or biscuits – just edge glue, some sanding, and you are done.
and like Johnstone said – new [very sharp] carbide bits will give you a much cleaner cut. (and last longer).
as for speed: you will have to determine that yourself. some woods behave differently than others
with a router – personally, I use full speed of the tool in just about everything.
and yes – plywood will splinter – that is their nature. and not just the top layer, but all layers.
a slower speed will produce more splinters – a faster speed for a smoother “less” splinters and tearout.

good luck !!

- John Smith


-- Why pay somebody when you can DIY?!?


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com