Reply by Rich

  • Advertise with us

Posted on Need advice on T track installation in work bench

View Rich's profile (online now)


4821 posts in 1070 days

#1 posted 02-12-2018 03:14 PM

Some brands add openings every so often, so you don’t have to start at the end each time. I had already installed Incra brand and decided to drill my own. You can get by with a 1/2” bit, since that’s the corner-to-corner measurement for a 1/4-20 bolt head. Also, be sure to take a good, sturdy block of wood for a guide, drill through it, and use hold-downs when you go to drill the track, otherwise the bit will walk around uncontrollably.

There are other possibilities as well, like burr wheels. Whatever works for you.

-- There's no such thing as a careless electrician

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics