LumberJocks

Reply by OSU55

  • Advertise with us

Posted on Arm R Seal Frustration

View OSU55's profile

OSU55

2658 posts in 2869 days


#1 posted 02-08-2018 01:15 PM

Welcome to the challenges of finishing large flat surfaces – its why I spray them. You need to rub out the finish, if the film thickness is where you want it. If not, keep adding coats and scuffing in between.

Wet sanding with say 800, use ms not water, will knockdown high spots. Then go over the whole thing with 1000 and 1200, then 0000 steel wool, then various auto paint polishes to get it to the sheen you want. Hopefully you dont go through the last layer of finish and get ghost lines. Poly is a great finish to own, but can be a pita to apply and get just right.

You can also wet sand with the poly, then just wipe it off. Helps fill the pores.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com