Reply by Jim Finn

  • Advertise with us

Posted on Bandsaw box question

View Jim Finn's profile

Jim Finn

2835 posts in 3690 days

#1 posted 02-03-2018 12:03 PM

Last year I made over 30 bandsaw boxes and soon learned that there is an awful amount of sanding required. Inside and out. I cut this sanding down, by a lot, by only sanding the outside of the box and the outside of the drawers. The inside of the box, and of the drawers, I applied flocking and that doesn’t require sanding. Flocking this way also makes the drawers slide in and out very smoothly.

-- No PHD just a DD214 Lubbock Texas

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics