LumberJocks

Reply by crashn

  • Advertise with us

Posted on Zero Clearance Insert

View crashn's profile

crashn

528 posts in 3068 days


#1 posted 05-30-2012 06:19 PM

I would recommend using a 7 1/4 inch blade with the same kerf size. After the initial cut, replace with your blade and use a piece of scrap clamped to the front and back of the saw (runs over the insert) to hold down the insert while raising the blade.

-- Crashn - the only thing I make more of than sawdust is mistakes


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com