LumberJocks

Reply by RichBolduc

  • Advertise with us

Posted on Pro's and Con's of 2x4 frame vs plywood miter saw station / work bench

View RichBolduc's profile

RichBolduc

1080 posts in 595 days


#1 posted 02-02-2018 06:39 PM

Thanks for the replies you two.

Brian, that’s pretty much what I was thinking, minus that flip top. I figure doing a bunch of cross supports with the 2×4’s would also make it similar to a torsion top. The Miter Station will also only have 4 sides on it essentially also, as I plan on storing things under it that can be wheeled in and out from under it (compressor, planer, shop vac/dust collector).

Les, glad to know this will work. My reasoning for the MDF top was it’s sturdy and flat. But by sandwiching it with screws I could replace it fairly easy once it gets damaged as it would only be screwed in from underneath to the plywood. What did you use as a sealant? It seems most used a regular shellac.

Rich


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com