LumberJocks

Reply by fivecodys

  • Advertise with us

Posted on Jet DC1100 Transformation ***COMPLETED***

View fivecodys's profile

fivecodys

1425 posts in 2023 days


#1 posted 01-30-2018 07:30 PM



Did you end up using standard or large radius elbows? I know what you mean about ducting getting expensive, I need to plumb mine and it s going to be mostly 7” only stepping down closer to each tool.

- bigblockyeti

The duct work I purchased was from Oneida. It’s all 26 Gauge. All of the elbows are their long sweep adjustable.
All the duct is 5” and will step down to 4” with the exception of the table saw which will stay at 5”.
I did use HVAC elbows for the exhaust. My local hardware store had them and they were only $3.00 a piece.

-- When you leave your shop for the night, make sure you can always count to 10.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com