LumberJocks

Reply by LesB

  • Advertise with us

Posted on Cantilever workbench for building fishing rods

View LesB's profile

LesB

2226 posts in 3987 days


#1 posted 01-30-2018 12:45 AM

The 2×4 s will work fine unless you intend to stand on the top of the bench. Just be sure to get the height correct so you are comfortable sitting for long periods of time when you are wrapping those fishing rods. It is tedious work and you don’t want your back or neck bent at a bad angle. Although you chiropractor will enjoy seeing you…..

I use to make my own rods but I used a portable rod holding frame that sat across the arms of my recliner so I could watch TV while doing the wrapping work. If I still did it I would get a motor driven rod rotator. As I recall I spent hours rotating the rods while the epoxy cured on the wrappings.

-- Les B, Oregon


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com