Reply by Bbarry9999

  • Advertise with us

Posted on Remove Spindle on WEN 6510 Osiclatting Spindle Sander

View Bbarry9999's profile


2 posts in 946 days

#1 posted 01-28-2018 11:55 AM

Shortly after posting this question, but after hours of scratching my head. It dawned on me to just clamp the shaft with pliers and turn the sleeve by hand to back the bolt off. The nut was embedded tight enough into the rubber sleeve that it just backed right off. Then used a dowel rod to pop the nut free of the sleeve. It’s usually the simplest solution that works best. Lol

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics