LumberJocks

Reply by TheTurtleCarpenter

  • Advertise with us

Posted on Brad Nail Blowout

View TheTurtleCarpenter's profile

TheTurtleCarpenter

1053 posts in 1952 days


#1 posted 01-27-2018 07:52 PM

I always took pliers and pulled the nail out and away from the wood and then bent the Brad from side to side to break it off ,,and 9 times out of ten it would break off below the surface. This works for 18 &23 ga brads and then you can drop some glue into the divet and press the sliver back over with a clamp or just tap it flush and sand

-- "Tying shoelaces was way harder than learning to Whistle"


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com