LumberJocks

Reply by 12bar

  • Advertise with us

Posted on belt sander sanding problem

View 12bar's profile

12bar

25 posts in 921 days


#1 posted 01-19-2018 11:31 PM

Checked trying to hold the wood off the table and it still kicked back and there is like a slapping sound. Also checked the table to square with the sanding base plate which the Abranet Mesh rides on . Using a square against my Incra miter Fence and table with the square to the the plate over which the Abranet rides and it is square. I have 5/32 space on each end between the ends of the table and the belt.
So maybe the problem is the space between the table and the belt since it said it shouldn’t be more than 1/16 of an inch. However that doesn’t explain why I get a pushing back and forth and a slapping sound when I try holding the wood to the belt above the table.
Just has me stumped completely.
Maybe I should try a regular type of 6×48 sanding belt. When I got the belt sander the belt on it was shot so I changed it to an Abranet Mesh belt and immediately starting having this problem.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com