LumberJocks

Reply by bilyo

  • Advertise with us

Posted on Need a quick release attachment for a safety rail to add to a wood baby crib

View bilyo's profile

bilyo

910 posts in 1665 days


#1 posted 01-19-2018 03:05 PM

The first thing that comes to mind is whether the mattress brackets could be lowered so that the distance between the mattress and existing top rail is greater. This might accomplish the desired purpose without the additional rail you propose. Maybe the same can be accomplished by moving the mounting points of the vertical slides upward. Be sure none of this interferes with the catch mechanism.

For the added top bar, I like the “T” shape. It adds stiffness. For mounting, the first thing that comes to mind is a pair of loose pin door hinges. Put the top of the “T” where ever you like. Then make the leg of the “T” long enough to lay against the inside face of the bed leg. Mount a hinge at each end as if the top bar you are installing was an inset door. Now, you can pull the pin on one end and swing the bar aside on the other hinge. Or, remove both pins. This will work better if you replace the pins with a slightly smaller diameter rod with an “L” bent into the top for easier grabbing and removing.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com