LumberJocks

Reply by fivecodys

  • Advertise with us

Posted on Jet DC1100 Transformation ***COMPLETED***

View fivecodys's profile

fivecodys

1427 posts in 2030 days


#1 posted 01-17-2018 11:29 PM



Unfortunately that last 1% that isn t captured is composed of the smallest, most dangerous (from a health standpoint) dust particles, some kind of filter would be better than none.

- bigblockyeti

I think there is some confusion here so let me try this again.

The Super Dust Deputy claims that of the saw dust and chips collected, 99% are captured and sent to the barrel.
The one percent that is not captured, exits out of the blower out outside through a dryer vent. (or something similar)

IF I was returning this air back into the shop then yes, that 1% of fine dust would indeed be an issue that would require a filter. But, since I am not returning that air back into the shop, but to the outside, it will not be an issue.

Now with all of that said, there is still the issue of the dust that the collector does not gather at the machines.
This will be an issue, as it is in any shop, that will require an air cleaner and dust masks when needed.

This is why I have installed an air cleaner in the ceiling where, I believe, most of the airborne dust will be floating around.

I hope this makes it a little clearer. No pun intended. :)

Thank you for your comments.

-- When you leave your shop for the night, make sure you can always count to 10.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com