LumberJocks

Reply by mpdive

  • Advertise with us

Posted on Burning up the wood

View mpdive's profile

mpdive

10 posts in 3335 days


#1 posted 01-17-2018 09:47 PM

Thanks for the reply. Yes I checked parallel on both the miter slots and the fence. 50 tooth Freud thin kerf was on there and I replaced with an Amana 40 tooth high dollar. Weirdest thing. I used my combination square in the miter slot to check for square and it was literally dead on from the front to back of blade. I just noticed today that my switch is going bad and I have to click it on and off a couple times to get it to start. My first thought was that maybe it wasn’t spinning up to the full RPM if the current was failing during cutting, but it sounds like once it’s up and running it’s not cutting off. Maybe I need to recheck one more time for alignment with a full cup of coffee in hand. Again, thanks for taking the time to reply!


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com