LumberJocks

Reply by Kazooman

  • Advertise with us

Posted on Violent kickbacks when cutting trim miters on tablesaw

View Kazooman's profile

Kazooman

1316 posts in 2338 days


#1 posted 01-16-2018 06:49 PM


There s no way for the offcut to get pinched unless the workpiece somehow rotated.

- builtinbkyn

The off cut was not pinched. After the cut was complete the off cut piece was unstable on the rounded surface. It fell back into the rotating blade. I know that most kick backs are caused by the piece being pinched into the rear of the blade. However, try tossing a small piece of wood into the front teeth on a rotating saw blade. It will go flying. That is just what the OP observed.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com