LumberJocks

Reply by Scott Oldre

  • Advertise with us

Posted on Delta 31-250 Drum Sander elevation gear removal

View Scott Oldre's profile

Scott Oldre

1128 posts in 4353 days


#1 posted 01-13-2018 03:51 PM

Knockonit, I just bit the bullet and spent the money on the metal gears. I know they are outlandishly expensive, but they are cut and drilled to fit exact, so I went with it. To replace the machine would be $1400 for Supermax or $900 for Grizzly. So for a little under $200 I justtified keeping what i have. I did see your approach and wondered if you couldn’t adapt one of those closed end ratchet wrenches to replace your visegrip. Seemed like a lot of work to flip everything around, and my time in the shop is limited by my time at work, so had to go the quick fix route. Did get all the gears off, so now waiting for the parts to arrive.

Thanks for the reply.

-- Scott, Irmo SC


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com