Reply by John Smith

  • Advertise with us

Posted on Another what to do with this piece of wood. butcher block countertop

View John Smith's profile

John Smith

1828 posts in 551 days

#1 posted 01-09-2018 08:33 PM

of course you can !! photos of your finished project would be interesting to see.

I would suggest sanding down to 80 grit on both sides to get the best adhesion
and you can use whatever length pattern you choose. if I were doing it, I would
figure out how many cubic inches you have in that board.
then decide how thick you want it
that will give you the overall square inches that you will be able to cut.
you don’t to do the standard square pegs or strip type board.
the design is limited only by your imagination.
Pinterest can give you hundreds of good ideas on cutting board design.[]=Butcher%7Ctyped&term_meta[]=Block%7Ctyped&term_meta[]=Cutting%7Ctyped&term_meta[]=Board%7Ctyped&term_meta[]=design%7Ctyped


-- Failure is proof that you at least tried ~ now, go do it again, and again, until you get it right --

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics