LumberJocks

Reply by bbasiaga

  • Advertise with us

Posted on Sharpening system advice...final tweak to my setup?

View bbasiaga's profile

bbasiaga

1243 posts in 2632 days


#1 posted 01-02-2018 09:25 PM

Thanks for all the input. I was reading around again and figured out my diamond ‘fine’ stone is more like 600 grit than 1k. So I’ve been making a bigger jump there than I thought. I suppose it depends on which charts…It may be closer to 800. Either way, may explain why it always seemed to take more than 10 strokes to polish up like people always say.

I may look at the Ohishi 1k/8k combo, or separate 1k and 8k shaptons….something I will use more because it is less of a hassle. If I had a sink in the garage it would be a non issue…but that is way more expensive than new Stones!

-- Part of engineering is to know when to put your calculator down and pick up your tools.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com