LumberJocks

Reply by Yettiman

  • Advertise with us

Posted on Radial Arm Saw Table height

View Yettiman's profile

Yettiman

163 posts in 4615 days


#1 posted 08-01-2008 09:47 PM

Hi,

After all your comments I have decided to midify the design.

I have knocked a (very bad) sketch up design, sorry still learning

The Idea is that I build a fairliy standard frame with 3×2’s and the fasten this to four suppot legs. Each leg has an adjustable foot.

The RAS steel base is the fastened to the frame and raised into the perfect hiegt by means of the adjustable feet.

This seems to take the best of the torsion box and the adjustment (via bolts) ideas.

Once at the pefect hieght, I can the fasten the two side battens to the ajacent cabinets with screws.

THanks for you support and ideas, they really helped.

-- Keep your tools sharp, your mind sharper and the coffee hot


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com