LumberJocks

Reply by MrUnix

  • Advertise with us

Posted on Unisaw bearing replacement

View MrUnix's profile

MrUnix

8772 posts in 3440 days


#1 posted 12-22-2017 09:11 PM

Not sure the exact measurement, but they are about $10 or less at the aftermarket suppliers. I also don’t believe there are different ones depending on tilt, as that nut is held in place via a flat disc retainer that gets a tab bent up to hold it – so one from any Unisaw model should work fine. Do you need one or just curious?

Edit: I just realized that we may be talking different parts.. there is a hex nut that threads on the end of the arbor shaft (described above^^^), and there is what is known as the large arbor bearing retainer nut that screws into the arbor housing… the later having the threads on the outside and manipulated via a pin wrench or similar. That one has an OD of 1.5” and 20 TPI. Also available at aftermarket suppliers for about $10.

Cheers,
Brad

-- Brad in FL - In Dog I trust... everything else is questionable


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com