LumberJocks

Reply by BobAnderton

  • Advertise with us

Posted on Kokeshi doll

View BobAnderton's profile

BobAnderton

302 posts in 3326 days


#1 posted 12-21-2017 05:06 AM

If that piece were aluminum a machinist would say “no problem, I’ll just put it on the milling machine and mill that slot out” I think you can do the same thing with a straight router bit, you just need to jig something up on the router table that will enable you to hold the round piece securely and will have stop blocks on the fence that will limit how far side to side the piece can move. Forgive my not-to-scale drawing below but it will get the point across I think. Make the workpiece holder out of stock thick enough that it won’t be cut all the way through when you do the operation. In other words, the stock will be thicker than the height of the bit

-- Bob Anderton - Austin, TX - Nova 3000 lathe, Alaskan Mark III mill, Husqavarna Saw


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com