Reply by JayCop

  • Advertise with us

Posted on Sandpaper reccomendation for endgrain

View JayCop's profile


37 posts in 2914 days

#1 posted 11-27-2017 06:59 PM

In my experience with this the drum sander is not leaving you a flat surface to sand with the orbital making it take forever to get the drum sander marks out. The cheap solution is to then use a belt sander to get a flatter surface before switching to the orbital. The best solution I found and use is a stroke sander. My 15×10” boards take 6 minutes total to sand with the stroke sander then only another 4 or 5 minutes with the random orbit to finish it off.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics