LumberJocks

Reply by gmcdually

  • Advertise with us

Posted on How do you change a drive belt on a walker turner lathe

View gmcdually's profile

gmcdually

6 posts in 1302 days


#1 posted 11-18-2017 02:12 AM

Thanks for the replies but, I got it out before I read your replies.
After purchasing a dead blow hammer and a using a heavy swing it came loose. The issue was the pulley. It was stuck on burrs from the set screws. I then lightly filed the burrs off the spindle and honed out the pulley so it would slide more easily on the shaft. Also, I cleaned all the parts and lubed everything and reassembled the head stock.
Now, want a good laugh ? I did all that and didn’t put the drive belt on. So, I had to take it apart and install the new belt.
The next time (if needed) I will purchase a link typed v-belt.
All in all replacing the belt might be the easy part. Now, I have to have fun and learn how to use this thing,
Thanks again….

-- Bob, Hawley, PA


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com