Reply by mkyb14

  • Advertise with us

Posted on How to attach side board to table - Bowling alley table

View mkyb14's profile


11 posts in 665 days

#1 posted 10-25-2017 10:44 PM

two additional questions.

1. when sanding, there seems to be some flaking happening between the joints. Meaning, as I look closer some spots seem to between the maple glue line have 1/2cm to 1in peel/flake happening. I can take a razor blade and lift it slightly and see that they are sometimes 1/2cm to 1in long and would create a big chip if I were to pull it up.

How would you go about fixing this?

2. what final finish coat did you use on the surface? there seems to be a lot of movement with so many joints, trying to avoid something that’s going to setup and crack once it’s moved or used with weight on the surface.

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics