LumberJocks

Reply by jonah

  • Advertise with us

Posted on Pre finished plywood drawers

View jonah's profile

jonah

2092 posts in 3859 days


#1 posted 10-23-2017 02:46 PM

It’s probably due to the plywood’s thickness not being a full half inch. Most “1/2 inch” plywood is actually 12mm thick, which is about 15/32 or 0.47”.

You can set the Kreg jig to a slightly shallower angle (one more notch on the stop) and you should be fine. Make sure to try on a piece of scrap first to make sure it doesn’t punch through.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com