Reply by EdsCustomWoodCrafts

  • Advertise with us

Posted on Router Circle Cutting Jig

View EdsCustomWoodCrafts's profile


932 posts in 2231 days

#1 posted 10-10-2017 04:02 PM

Well I took the path of least resistance and made my own using a variance some ideas I saw on the net

I used 3/4” plywood
I didn’t use the the routers sub base to attach the jig I just screwed up into the router for underneath

The only thing that is bothering me is that my radius is off by less than 1/8” and I think it’s because I just used a nail as the pivot pin.. I think I need to use something a little more substantial almost like a pin I use in my shelf pin jig .. that way there will be no play in the pivot and thus removing the 1/8”

Thanks everyone for there in put

-- Thanks Ed “A bad day woodworking is better than a good day working. ~Author unknown” . Come check out my website for more about what I make and how at

DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics