LumberJocks

Reply by Rich

  • Advertise with us

Posted on Router Circle Cutting Jig

View Rich's profile

Rich

5955 posts in 1467 days


#1 posted 10-10-2017 04:11 AM

A bushing works well for this. No need to mount the router to the jig, just drill a hole the same diameter as the bushing and the router will drop in. You should taper the jig so that the part the router sits in is as big as the base for stability.

I’d probably go with a 3/8” OD bushing and a 1/4” straight bit. The offset will be 1/16” so drill your hole for the bushing to account for that.

-- Half of what we read or hear about finishing is right. We just don’t know which half! — Bob Flexner


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com