LumberJocks

Reply by Derek Cohen

  • Advertise with us

Posted on Flattening Rough Board with only Low Angle Jack?

View Derek Cohen's profile

Derek Cohen

470 posts in 4483 days


#1 posted 10-06-2017 01:36 PM

Mike

You will need a second blade with an 8” camber …

Then you can hog off thick shavings ..

When you do so, plane either across the grain or diagnonally to it. Then you will not need to be concerned about tearout, and can use a 25 degree bevel.

The alternative to this is to purchase a cheap Stanley #5, and camber the blade on that.

Regards from Perth

Derek

-- Buildiing furniture, and reviewing and building tools at http://www.inthewoodshop.com


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com