LumberJocks

Reply by NiteWalker

  • Advertise with us

Posted on Table saw set up issue with miter slots

View NiteWalker's profile

NiteWalker

2743 posts in 3862 days


#1 posted 03-25-2012 02:47 AM

Here’s the way I do it, learned from the late Nikki:
I use undersized runners (width-wise) and use masking tape to shim them towards the blade before attaching them to the sled. This eliminates any issues like you’re having because the runners could be 1/2” wide and still be snug on the saw. After making the initial cut to align the fence I use a quick grip clamp to squeeze the two sides of the base a bit so they don’t move away from the blade. Works perfectly and slot size and fit are not an issue at all.

-- He who dies with the most tools... dies with the emptiest wallet.


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com