LumberJocks

Reply by knotscott

  • Advertise with us

Posted on Table saw set up issue with miter slots

View knotscott's profile

knotscott

8434 posts in 4660 days


#1 posted 03-24-2012 07:39 PM

As Joe suggests, check out the mating surfaces. You may need to sand or file that surface a bit to get it to fit better. 0.013” is less than 1/64”....not huge IMO. The real indicator should be the cuts….how much does it effect them?

Taking it back is always an option, but if that’s the only issue with the saw, you might that the path of least resistance is to do a little mod work vs returning the saw. If you’re able to get it to work with a little effort, I’d let Steel City know and ask for something like a blade as compensation for your time.

-- Happiness is like wetting your pants...everyone can see it, but only you can feel the warmth....


DISCLAIMER: Any posts on LJ are posted by individuals acting in their own right and do not necessarily reflect the views of LJ. LJ will not be held liable for the actions of any user.

Latest Projects | Latest Blog Entries | Latest Forum Topics

HomeRefurbers.com